| XS | S | M | L | XL | 2XL | 3XL | 4XL | |
| Chest (inches) | 30-32 | 34-36 | 38-40 | 42-44 | 46-48 | 48-50 | 50-52 | 52-54 |
| Waist (inches) | 28-30 | 30-32 | 32-33 | 33-34 | 36-38 | 40-42 | 44-48 | 50-54 |
Ladies' Triblend Racerback Tank
| XS | S | M | L | XL | |
| Length (inches) | 26 7/8 | 27 1/2 | 28 1/8 | 28 3/4 | 29 3/8 |
| Width (inches) | 15 | 16 | 17 | 18 | 19 1/2 |
| S | M | L | XL | 2XL | 3XL | 4XL | |
| Waist (inches) | 27-30 | 30-33 | 33-36 | 38-40 | 41-43 | 44-47 |
48-50 |
*These are not preshrunk.
We advise you to measure your arm when in a locked out with your muscles relaxed. Select the size below that best fits both measurements.
| Size | 2" below (in) | 2" above (in) |
| XS | 8.20 - 10.20 | 9.40 - 11.80 |
| S | 9.40 - 10.40 | 10.60 - 13.20 |
| M | 10.60 - 12.60 | 11.80 - 14.60 |
| L | 11.80 - 13.80 | 13.00 - 15.90 |
| XL | 13.0 - 15.0 | 14.20 - 17.30 |
| 2XL | 14.20 - 16.10 | 15.30 - 18.70 |
| 3XL | 15.20 - 17.10 | 16.30 - 19.70 |
| 4XL | 16.20 - 18.10 | 17.30 - 20 |
For specific sizing please refer to the product page size chart.
TUFF 7mm X-Training Knee Sleeves
How to Size: Measure circumference of the knee (mid-patella) in a locked position (muscles must be relaxed). Unisex sizes.
| S | 11.8 in. - 13.0 in. |
| M | 13.0 in. - 14.2 in. |
| L | 14.2 in. - 15.7 in. |
| XL | 15.7 in. - 17.0 in. |
| XXL | 17.0 in. - 18.3 in. |
*If you prefer a tighter fit please order one size smaller than your measurement.
TUFF 7mm Power Series Knee Sleeves
How to Size: Measure circumference of the knee (mid-patella) in a locked position (muscles must be relaxed). If your calves are bigger than your knee measurement, we recommend using the circumference of your calf
| Sizes | Measured in inches |
| XS | 12" - 13.3" |
| S | 13.3" - 14.5" |
| M | 14.5" - 15.7" |
| L | 15.7" - 17" |
| XL | 17" - 17.7" |
| XXL | 17.7" - 18.5" |
| 3XL | 18.5" - 19.3" |
| 4XL | 19.3" - 20" |
Looking for a lever buckle that is made from the highest quality metal material? Look no further as our TUFF Forged Alloy Buckles are made from zinc alloy rather than cast iron and can withstand the forces applied on the belt during a squat or deadlifting. You can now just replace the buckle, extending the lifespan of your belt, and saving you money at the same time!
Easy to Install - Our Buckle is packed in a special packaging screws packed separately, there are very few parts, just two screws that attach the lever to the belt. Remove the old screws.
